Support
Documentation
FTX-1
Radio Transmitter over Simplex Fiber The FTX-1 allows the conversion of UHF electrical signals into optical signals, offering the advantages of optical fiber transmission (low loss, wide bandwidth) as well as the inherent benefits of the medium…
FRX-1
FRX-1 Simplex RoF receiver The FRX-1 receiver allows the conversion of optical signals into UHF electrical signals, offering the advantages of optical fiber transmission (low loss, wide bandwidth) as well as the inherent benefits of the medium itself…
AFB-250
AFB-250 : Dual Rx Antenna Fiber Box AFB-250 is designed to modulate radio signals from two receiving antenna to one optical Neutrik Duo APC output. Any passive or active antenna can be plugged in as it provides DC feed. DC feed are protected from…
AFR-250S
Small form factor dual radio over fiber receiver. The AFR-250S is a optical/RF converter. Used with the AFB-250 it let you take advantage of propagation of light on monomode fiber. Tha AFR-250S can be used in several situation, it can be used on…
AFR-200
AFR-200 : Dual Fiber Antenna receiver (2 fibers) AFR receivers demodulate RF signals from two fiber optics antennas to coax outputs towards diversity RF receivers. Use this product with one AFB-250, this is the basic set.
ACH-642
ACH-642 Dual Channel Hybrid Combiners (2 coax, 4 fibers) Hybrid antennas combiners can receive both coax antennas for nearby areas (2 active or passive antennas) and fiber antennas for distant areas (connected to AFB-250) combined towards two BNC…
ACH-862
Dual channel 8 antennas hybrid combiner with IP remote (2 coax, 6 fibers) ACH-842 is a two channel hybrid diversity combiner, two coax and six fiber antennas towards two BNC outputs. Switch antenna locally or remotely. Main IP features are: Remote…
AFB-350
AFB-350: Single Tx Antenna Fiber Box AFB-350 allows transmission of RF signal to one antenna through fiber optics. It comes with a built-in simple SWR indicator. With its rugged housing and 12V on XLR4 power, it is designed for location or live…
ATH-200
ATH-200 Hybrid Transmission Station (2 coax, 2 fibers with option*) ATH-200 is an hybrid transmission station for one or two carrier allowing transport of transmission signal to remote antennas through optical fiber. Wireless monitoring and intercom…
AS-84
Active Combiner/Splitter in a small form factor (4:8) The AS-84 is a diversity active combiner/splitter (2 BNC to 4 SMA for each channel) design to be used with up to 4 diversity receivers. With the AS-84 you can: Choose diversity port (PORT 1…
AS-62
Compact Active splitter 2:6 The AS-62 is a dual channel active antenna splitter (1 BNC to 3 SMA per channel) for use with up to three diversity receivers. With its rugged and compact housing, it is designed for harsh conditions and can easily be used…
AS-122
Dual channel active splitter AS-122 is a dual channel active antenna splitter (1 BNC to 6 SMA per channel) for use with up to six diversity receivers. With its rugged and compact housing, it is designed for harsh conditions and can easily be used in…
FA-1
Filtered amplifier with fail-safe. FA-1 is a filtered amplifier that enhance RF performance of your RF equipments when facing RF interference (walkies,DECT, WIFI, GSM/4G, bases intercom...). Selectable gain steps: +6/+9/+12dB to compensate loss in…
PM-1
PM-1 Broadband RF power meter, the Swiss knife of RF. Check easily your coaxial cables and your transmitters. Measure attenuation of coaxial cables, test RF power of your transmitters in the 10MHz-1000MHz range. Simple and accurate it will be the…
LAC-21
2:1 Active combiner with selectable gain. The LAC-21 is a compact RF combiner particuliary usefull when you need to sum up two TX and share one antenna. As it works from 100MHz up to 800MHz you can imagine many configurations. A switch will help you…
ADH-400
ADH-400 Duplex Station (TX: 2 coax, 2 fibers/ RX: 1 coax, 2 fibers) ADH-400 is an hybrid duplex station allowing both transmission and reception signals carriage through fiber optics, it also features direct coax input and output. ADH-400 perfectly…